It is a P60 host of sorts , the head is 20mm ID , and the battery tube is 17.6mm ID .. Most of my P60 pills measure 22.6mm OD , im measuring the body not the full dia of the reflector .
So if the head is bored to 23mm then it should work with any P60 pill .. For the price I payed , this look like a great mod host .
This is a nice petite light , just a little smaller overall than say a L2 , or even a Ultrafire 501B . The tail clicky seems fine , and all I can fault is the odd diameter of the head [ internally ]
In the second picture , you can see the head , 2 parts , lens/retainer and the head followed by the body [ battery tube ] and tail clicky .
The bulb seems to handle 2xRCR123A [ 8.4v ] ...
Current Drain on two primaries = o.98A / 5.77v under load = 5.7Watt - 70Lumen
Current drain on two RCR123A = 1.16A / 7.93v under load = 9.2Watt - 250Lumen
The light is very orange when compared to a LED , but I was surprised by the output on two RCR's ..
Im looking forward to taking this light for a walk , I have already ordered a 17670 battery , so will most likely have the head bored to 23mm so I can drop in a LED pill ..
Overall a nice petite light , and the quality is in the cheaper side , but from a functional view seems more than fine .. Certainly look forward to moding it to LED and using a 17670 battery .
Should make for a really nice walk about light , and I just built a Cree XP-E R3 pill that could be a good drop in for this body .